Jaeger
Knifemaker from Germany
Hy there,
In this thread i wanna share my WIP's and knives i will make and made.
The last one I've finished is a small European style chefknife in handy dimensions.
155mm(sharp) by 45mm with an 125mm handle out of stabilised Lacewood.
Steel ist 1095 ~60HRC.
Its fully tapert from 3mm down to about 0,3mm at the tip.
I ground the blade slightly convex from the spine to the edge down to zero and gave it a 34° cutting edge.
I finished the blade lengthwise to 1000grit and then crosswise with 800grit scotchbrite.
Greets Fabian ✌
In this thread i wanna share my WIP's and knives i will make and made.
The last one I've finished is a small European style chefknife in handy dimensions.
155mm(sharp) by 45mm with an 125mm handle out of stabilised Lacewood.
Steel ist 1095 ~60HRC.
Its fully tapert from 3mm down to about 0,3mm at the tip.
I ground the blade slightly convex from the spine to the edge down to zero and gave it a 34° cutting edge.
I finished the blade lengthwise to 1000grit and then crosswise with 800grit scotchbrite.
![PXL_20211021_175230306.PORTRAIT.jpg PXL_20211021_175230306.PORTRAIT.jpg](https://cdn.imagearchive.com/kitchenknifeforums/data/attach/140/140911-PXL-20211021-175230306.PORTRAIT.jpg)
![Screenshot_20211021-094951.jpg Screenshot_20211021-094951.jpg](https://cdn.imagearchive.com/kitchenknifeforums/data/attach/140/140912-Screenshot-20211021-094951.jpg)
![PXL_20211020_191258494.PORTRAIT.jpg PXL_20211020_191258494.PORTRAIT.jpg](https://cdn.imagearchive.com/kitchenknifeforums/data/attach/140/140913-PXL-20211020-191258494.PORTRAIT.jpg)
![PXL_20211029_115619401.PORTRAIT.jpg PXL_20211029_115619401.PORTRAIT.jpg](https://cdn.imagearchive.com/kitchenknifeforums/data/attach/140/140918-PXL-20211029-115619401.PORTRAIT.jpg)
![PXL_20211029_115039689.PORTRAIT.jpg PXL_20211029_115039689.PORTRAIT.jpg](https://cdn.imagearchive.com/kitchenknifeforums/data/attach/140/140917-PXL-20211029-115039689.PORTRAIT.jpg)
![PXL_20211029_115002562.PORTRAIT.jpg PXL_20211029_115002562.PORTRAIT.jpg](https://cdn.imagearchive.com/kitchenknifeforums/data/attach/140/140916-PXL-20211029-115002562.PORTRAIT.jpg)
![PXL_20211029_090843752.PORTRAIT-01-02.jpeg PXL_20211029_090843752.PORTRAIT-01-02.jpeg](https://cdn.imagearchive.com/kitchenknifeforums/data/attach/140/140924-PXL-20211029-090843752.PORTRAIT-01-02.jpeg)
Greets Fabian ✌
Last edited: